Tiny beads in the 2-3mm range lend themselves to a variety of uses. They make great spacers in strung designs, add visual interest in conjunction with other bead sizes, and hang beautifully when strung or knotted. They can be wire wrapped into a chain of stunning gemstones.

Here are some tips when working with stone beads
under the 4mm mark:
 
Wire Gauge is Critical. You need to consider both the hole size in the bead AND the proportion. For example, our 3mm rondelles fit up to 24 gauge wire easily, but once it's wrapped, you might be feeling like something's a bit "off". That's likely because you're seeing more wire than bead, making the metal visually outweigh the bead you were expecting to accentuate. Your technique isn't the problem, it's the wire gauge. For a 3mm bead, it might be better to use a 26 gauge. 28 gauge also fits, and the results are more delicate. For a 2mm bead, you may find you have fewer options. Generally, you can step down to a 28 gauge, but 26 gauge wire will give good results.





Dakota Stones manufactures a variety of diamond cut microfacets in many stone types!

 SHOP MICROFACETS



Tools Matter. We all know that some tools have better hand feel and durability, but just because a tool is great for one task does NOT make it the perfect tool for all. Tools designed for precise work will make your life easier. Lots easier. Consider, for example, that most "economy" round nose pliers have about a 1.5 diameter at the tip, mid-range generally gets you close to the 1mm mark, and higher-end brands will measure at .75mm. If you're going to wire wrap with 26 gauge or under wire, do yourself a favor and get a round nose, chain nose and cutter designed for fine work. If you've been debating an upgrade, seriously, treat yourself. The best investment in jewelry making is finding the right tools.

Patience is Key. Most entry-level beading classes teach wire wrapping on 22 gauge wire. Why? Because it generally produces the best results for beginners and it's relatively easy to see. When you downsize your wire, it's a bit harder to see, the feel is different, and you'll need to adapt before you're as proficient as you normally are. Give yourself some grace and some time to get the feel of it. Try stepping down a gauge level at a time. For example, if you've never worked with 24 gauge wire before work with it a while to get the feel for it before moving on to 26 and then 28.


Jess used faceted larimar rondelles, faceted pyrite rondelles, 2mm faceted turquoise rounds & drops from her own stash to start her design.